webinar register page

Webinar banner
[Henry Webinar] Advanced waterproofing solutions with a PUMA system
There’s never a time to stop learning. Gain knowledge about the newest in commercial waterproofing systems -- PUMA, a cold fluid-applied waterproofing system with quick-cure technology and long term stability. PUMA technology combines Methyl Methacrylates with Polyurethanes for exceptional long-term performance. PUMA technical advances allow for waterproofing certainty where sheet-applied membranes are difficult to install due to complex design and construction requirements. Through this step-by-step presentation, you will understand how PUMA may solve common installation obstacles and how to properly specify/install a PUMA system to suit project specific needs. Enjoy an engaged discussion, find out which system is right for your project and ask questions in the comfort of your home office.

Nov 4, 2020 02:00 PM in Eastern Time (US and Canada)

Webinar logo
* Required information
Loading

By registering, I agree to the Privacy Statement and Terms of Service.

Register

Speakers

Shane Imonetti, CDT
Territory Manager @Henry Company
Shane Imonetti, CDT has been involved in design and construction since 2009 and now is the New England market Architectural Representative for the Henry Company. He specializes in air barrier, waterproofing, green roofing, expansion joints and concrete restoration. Additionally,he is on the board with the International Concrete Restoration Institute and the Construction Specifications Institute, and an active member with the Building Enclosure Council.
Todd Skopic, CSI, CDT, LEED AP
Building Science Manager @Henry Company
Todd Skopic, CSI, CDT, LEED AP has been involved in the design and construction industry since 1986. He specializes in water, moisture and air intrusion prevention into the building envelope. Additionally, Todd is the subject matter expert for both air barriers and waterproofing for the Henry Company. He is active in CSI, RCI, BEC, ASTM E06 and ABAA and with both ASTM and ABAA where he serves on technical committees.